Custom Fixture RFQ Checklist

3D model

STEP or IGES preferred. Native CAD is fine if you can share it.

2D drawing with GD&T

The tolerances actually drive the design — the model alone is not enough.

Datum scheme identified

Which surfaces are primary, secondary, tertiary.

Material and surface condition

As-cast, machined, painted, e-coated.

Part weight

Areas that must stay clear

Sealing faces, cosmetic surfaces, features machined later.

Machining, inspection, welding or assembly

Features to be produced or checked

List them; 'all dimensions' is not a specification.

Manual load or robot load

Required clamping type

Manual, pneumatic, hydraulic — or leave open for us to propose.

Acceptance criteria

How you will decide the fixture is good: GR&R study, master part, first article.

Machine make and model

Table size and T-slot or grid pattern

Spindle taper

BT30 / BT40 / BT50 / CAT / HSK.

Working travels (X / Y / Z)

Available Z clearance above the table

Stack height comes straight out of this.

Existing zero-point interface, if any

Brand and grid pitch, so the new fixture can share it.

Air or hydraulic supply available at the table

Annual volume and batch size

Number of fixtures required

Target cycle time, if it constrains the design

Required delivery date

Destination country and incoterm preference

Documentation required

Dimensional report, material certificates, PPAP level.

Files zipped and under the mail size limit

Or a download link if the model is large.

Confidentiality handled

Tell us if an NDA needs to be in place first.

Named technical contact

Someone who can answer datum questions directly.