LMLinkMasterCNC FIXTURE SOLUTIONS

CNC Workholding, Tooling & Inspection Products

Zero-Point Positioning Systems — Repeatable pallet clamping for faster CNC setup changes, with positioning performance matched to the selected interface and application.Illustrative configuration

Zero-Point Positioning Systems

Our zero-point positioning systems let machining, EDM, measuring and assembly stations share a common reference. The range includes positioning chucks, receiver plates, pallets and pull studs. Changeover sequence and repeat positioning performance depend on the selected locator, pallet interface, installation and test method; share your machine details and acceptance criteria for an engineering review.

  • Repeat positioning performance specified for the selected locator, interface and test conditions
  • Release method selected for the system design and operating sequence
  • Clamping and pull-down capacity confirmed for the selected model and load case
  • Modular base plates, chucks and pull studs
Angle Head Milling Cutters — Fixed, adjustable and extended-reach milling heads configured for compatible spindle interfaces.Illustrative configuration

Angle Head Milling Cutters

Angle head milling cutters redirect spindle drive to reach features that a vertical spindle cannot — deep pockets, side bores and cross holes — in a single setup. Precision bearings and hardened gears deliver rigid, low-runout cutting for milling, drilling and tapping.

  • 90° fixed and 0–90° adjustable output
  • Low runout, high torque transmission
  • BT / HSK / CAT and custom shanks
  • Internal / external coolant options
Inspection Workholding Fixtures & Gauges — CNC inspection workholding, checking fixtures and gauges built around the part datum scheme.Illustrative configuration

Inspection Workholding Fixtures & Gauges

We build inspection workholding fixtures, checking fixtures (CF) and functional gauges around the part's GD&T datum scheme and measurement method. Typical project briefs cover body-in-white, interior, powertrain and EV battery components, with go / no-go features, CMM-ready references or probe access planned to the drawing.

  • Built to customer GD&T & datum scheme
  • Body-in-white, interior & EV battery parts
  • Go / no-go and CMM-ready configurations
  • CNC-machined locating details; inspection documentation scoped to the project
Custom Workholding Fixtures — Fixtures engineered around your part, datum scheme and cycle time — manual, pneumatic or hydraulic.Illustrative configuration

Custom Workholding Fixtures

Custom workholding starts from the part, not from a catalogue. Our team reviews the datum scheme and force path with you, agrees how the part is located and clamped, then develops the build in our factory. Configuration, capacity and lead time are defined per project and confirmed during application review.

  • Datum strategy: critical locating faces and force paths defined first
  • Stable clamping balanced against rigidity, access and distortion control
  • Manual, pneumatic or hydraulic actuation, selected around the process
  • Modular base plates and standard grids to improve fixture reuse
  • Validated through fit-up, inspection and application feedback
Automation Solutions — Coordinate fixtures, loading and machining rhythm — from pallet exchange to robot-fed cells.Illustrative configuration

Automation Solutions

Automation is more than adding a robot. It connects positioning, clamping, changeover, inspection and machining into one controlled loop. We work from your cycle target and part family to coordinate the workholding side of CNC automation, with scope and configuration confirmed per project.

  • Robot loading and unloading supported by a repeatable datum
  • Pallet and fixture quick exchange between operations
  • Multi-station and multi-process coordination
  • Zero-point interfaces as the common reference for automated cells
  • Clamp / pallet presence checks and machine-side signals scoped to the cell
  • Scope, interfaces and acceptance sequence agreed before project release

Engineering-led product selector

Find the right fixture or tooling family

Choose the closest product family and share the machine, part and operation. Our team can review the fit and confirm project-specific specifications.

1. What are you sourcing?
Continue with this selection

Your selections will be added to the enquiry. A drawing or photo can be attached on the next step; final fit and specifications are confirmed during engineering review.

Manufacturing & inspection

See the work behind the product range

Review real machining, zero-point setup checks and dimensional inspection footage. For a new project, the part drawing, machine interface and acceptance requirements are reviewed before the configuration is quoted.

CNC machining

Machining operations used in fixture and tooling production.

Zero-point setup check

A dial-indicator check of pallet seating after reclamping.

Dimensional inspection

CMM inspection footage for a checking-fixture build.

Need a fixture, zero-point interface or inspection gauge for a specific part? Send the drawing and process details for an engineering review; project specifications and pricing are confirmed against the application.

Discuss your application