Workholding ROI Calculator for Zero-Point Systems
Enter your own shop figures below. Everything is calculated in your browser — nothing is sent anywhere, and no values are pre-filled with vendor claims.
Your figures
How many times this machine is re-fixtured in a normal day.
Clamping and indicating time per changeover today, on the machine.
Expected on-machine time once the fixture is pre-set off-line.
What one hour of this machine is worth to you — burden rate or sell rate.
Base plate, locators, pull studs and pallets for this machine.
Result
- Saved per changeover
- 0 min
- Machine hours recovered per year
- 0 h
- Value recovered per year
- $0
- Payback period
- No payback — setup time does not improve with these figures.
How this workholding ROI calculator estimates payback
The estimate uses only the figures you enter. It compares current on-machine setup time with your expected setup time after moving fixture preparation off-line, then scales the difference by your annual changeover volume.
Step 1
Minutes saved per changeover
Current setup minutes − expected setup minutes
Step 2
Machine hours recovered per year
Minutes saved × changeovers per day × working days ÷ 60
Step 3
Indicative payback period
System cost ÷ annual recovered value × 12 months
Recovered machine time is not automatically extra revenue: the result depends on demand, bottlenecks, implementation cost and whether the saved time can be used productively. For the assumptions behind a real project estimate, read our zero-point workholding ROI and payback guide.
What this does and does not include
The model values recovered spindle time only. It does not include scrap reduction, fewer re-works from consistent datums, less operator fatigue, or the cost of pallets you may need beyond the base system. It also assumes the recovered hours can actually be sold or used — if the machine is not a bottleneck, treat the result as an upper bound.
Want these numbers checked against your actual setup?
Send your machine model, table size and a typical part drawing. We will review the application and come back with a configuration and a quote.
Read next
- Zero-Point Workholding ROI & Payback
- Zero-Point Positioning Systems: The Complete Guide
- Zero-Point Positioning Systems
Shanghai LinkMaster International Trading Co., Ltd.